little improvements and more docs

because it's out of sync

.gitignore

@@ -9,5 +9,4 @@ cfg/*.env
 cfg/*.toml
 
 build/
-buildTime.txt
-buildVersion.txt
+build*.txt

Makefile

@@ -24,6 +24,9 @@ endif
 # Variables
 #----------------------------------------------------------------
 progName = scaffold
+arch = amd64
+winbinName = $(progName).exe
+releaseTag = $(shell git describe --abbrev=0)
 
 #----------------------------------------------------------------
 # Helpers
@@ -51,17 +54,25 @@ clean:
 #----------------------------------------------------------------
 
 # build strips debugging info from binary
-linkerflags = '-s'
+linkerflags = '-s -w'
 
 prep: clean
 > date +"%F %a %T %Z" > buildTime.txt
 > git describe --always --tags --dirty --long > buildVersion.txt
+> @mkdir -p build
 
-build: prep
-> @go build -o build/$(progName) . && echo "Build success" || echo "[FAILED] go build"
+build: prep linux windows
 
-build-production: prep
-> @go build -ldflags=${linkerflags} -o build/$(progName) . && echo "production build success" || echo "[FAILED] production build"
+linux:
+> @GOOS=$@ GOARCH=$(arch) go build -o build/$@/$(progName) . && echo $@ "Build success" || echo $@ "[FAILED] go build"
+
+windows:
+> @GOOS=$@ GOARCH=$(arch) go build -o build/$@/$(progName)-$(arch)-$(releaseTag).exe . && echo $@ "Build success" || echo $@ "[FAILED] go build"
+
+build-production: prep linx-production
+
+linux-production:
+> @GOOS=linx GOARCH=$(arch) go build -ldflags=${linkerflags} -o build/$@/$(progName) . && echo "production build success" || echo "[FAILED] production build"
 
 #-------------------------------------------------------------
 # Install - same as build, but places binary on system path
@@ -74,4 +85,4 @@ install-production: prep
 > @go install -ldflags=${linkerflags} . && echo "Production build and install success" || echo "[FAILED] Production install"
 
 ## Commands that don't relate to a specific file
-.PHONY: help confirm clean prep build build-production
+.PHONY: help confirm clean prep build build-production linux windows amd64

README.md

@@ -2,18 +2,51 @@
 
 ## Intro
 
+Use scaffold to setup a new project with a directory skeleton of your design, and if you'd like, it can also automatically initialize local, remote and gitea git repositories for the new project.
+
+## What scaffold does
+
+- A new project directory is created
+- Your project skeleton/template is copied from your config/projectType/sample directory
+- your setup/initialization commmands are run
+- a git repository is initialized in the project directory
+  - and if you enable it, a remote repository is created and setup
+
+## Installation
+
+1 - Grab a version for your system from the releases page.
+2 - Put it in a directory that is on your path.
+3 - now configure your preferred setups/layouts/skeletons/templates for your projects.
+
+## Configuration
+
+On linux the configuration directory will be at /home/user/.config/devel/scaffold
+
+For the windows versions, you might want to look at your User_Configuration_Directories location, and change it according to your needs. On windows it's value is the %APPDATA% environment variable.
+
+In a PowerShell, use `Get Child-Item Env:` to display all the environment variables.
+Then `[Environment]::SetEnvironmentVariable("APPDATA","C:\Users\You\Wherever-you-like\","User")` to set the new value.
+
+## The `scaffold` command
+
+| Command | Description |
+| ------- | ----------- |
+| scaffold | The program name |
+| flags:
+  -i or -Info | Display the available project types and the build and version information about the program. |
+| **Examples:** |  |
+| scaffold *ProjectType* *NewProjectName* | Stuff |
+
+## Configuration of samples
+
+![Example Directory Structure](assets/images/dirtree-pic.png)
+
+The image should explain alot quickly. The go, go-cli, go-web, hs, js, py and svelte directories define the project types available to scaffold. Arrange the contents of the sample directory, within each project type directory, to your preferred layout for each language/use-case.
+
 ## Git
 
 Git is available to be used as the version control system for new projects. Select/Deselect within the `scaffold-<PROJECTTYPE>.toml` file.
 
-***Please Note** that if you also use it for your configuration files and sample directories, then a .gitignore file within your sample directory will interfere with git's ability to track your skeletons/templates properly. So, to allow for this, put what you normally would in a .gitignore file into a GITIGNORE file in your sample directory. And scaffold will convert it to a .gitignore file within your newProject directory.
+*Please Note* that if you also use git to track your configuration files and sample directories, then a `.gitignore` file within your sample directory will interfere with git's ability to track your skeletons/templates properly. So, to allow for this, put what you normally would in a `.gitignore` file instead into a file named `GITIGNORE` in your sample directory. And scaffold will convert it to a `.gitignore` file within your newProject directory.
 
 If you are NOT using git to track your project types and samples/skeletons/templates, then no problem, just place a .gitignore file within the sample directory as you would any other file.
-
-## The Process
-
-- The new project directory is created
-- Your project skeleton is copied from your sample directory
-- your setup/initialization commmands are run
-- a git repository is initialized in the project directory
-  - and if you enable it, a remote repository is created and setup

data-strings.go

@@ -11,85 +11,6 @@ scaffold go NewGoProject
 scaffold py aPythonProject
 `
 
-// var gi_template = `%s
-// .env
-// *.env
-// .env.toml
-
-// cfg/*.toml
-// cfg/.env
-// cfg/*.env
-// cfg/.env*
-// *.toml
-
-// build/
-// buildTime.txt
-// buildVersion.txt
-// `
-
-// var gi_py_template = `%s
-// .env
-// *.env
-// .env.toml
-
-// cfg/*.toml
-// cfg/.env
-// cfg/*.env
-// cfg/.env*
-// *.toml
-
-// bin/
-// `
-
-// var cfg_content = `# New Go Project configuration file
-
-// # Format: TOML - see https://toml.io for details
-
-// # Go specific
-// # Go module path is of the form basePath/projectName
-// # must be addressable if you are going to publish
-// module_basepath = "officallygood.com"
-
-// # where to put new project directories
-// # within the user's home directory
-// projects_basedir = "devel/GoMyApps"
-// #def_project_name = "new-go-project"
-
-// # Must be string, will be parsed to correct type
-// # Remember perms are in octal
-// project_dir_permissions = "0700"
-// file_permissions = "0660"
-
-// # Git
-// setup_git = true
-
-// # Do you have a remote location?
-// # Do you have autologins setup correctly with ssh keys?
-// # Using your .ssh/config file might be helpful
-
-// # setup remote repo?
-// create_remote_repo = false
-
-// # remote repo user@location
-// remote_user = "user@server"
-
-// # remote repo base dir
-// # relative to remote user home dir
-// # eg unix/linux server
-// #   for user@server:/home/user/git -- absolute path
-//         user@server:git  -- relative to home dir
-// # eg windows server
-// #   ???
-
-// ############################
-// # remote location MUST already exist on remote server
-// ############################
-// remote_location = "git"
-
-// # default remote short name
-// remote_shortname = "origin"
-//`
-
 var cfg_content = `# Scaffold program configuration
 
 # Format: TOML - see https://toml.io for details

main.go

@@ -10,6 +10,7 @@ import (
 	"os/exec"
 	"os/user"
 	"path/filepath"
+	"runtime"
 	"strconv"
 
 	"github.com/BurntSushi/toml"
@@ -47,7 +48,7 @@ var (
 	infoFlag     = flag.Bool("Info", false, "Displays the program build information and exits.")
 	infoFlag2    = flag.Bool("i", false, "Displays the program build information and exits.")
 	sep          = "/"
-	cfg_dir      = ".config/devel/scaffold"
+	cfg_dir      = "devel/scaffold" // relative to <USER_CONFIG_DIR>, on linux /home/user/.config
 	cfg_filename = "scaffold-cfg.toml"
 	setup        ScaffoldSetup
 	npsetup      Setup
@@ -57,9 +58,23 @@ func main() {
 
 	flag.Parse()
 
+	user_cfg_dir, err := os.UserConfigDir()
+	ifFerr("Unable to determine user config directory", err)
+
 	if *infoFlag || *infoFlag2 {
 		fmt.Printf("Scaffold version: %s", buildVersion)
 		fmt.Printf("Built: %s\n", buildTime)
+
+		if runtime.GOOS == "windows" {
+			fmt.Println("It's a windows system")
+		}
+
+		at, err := availableProjectTypes(user_cfg_dir + sep + cfg_dir)
+		ifFerr("Unable to get available project types", err)
+		fmt.Printf("Avaiable types: %v\n", at)
+
+		fmt.Println("System says -- user config directory: ", user_cfg_dir)
+
 		os.Exit(0)
 	}
 
@@ -67,7 +82,7 @@ func main() {
 	u, err := user.Current()
 	ifFerr("Unable to get current user details", err)
 	homeDir := u.HomeDir
-	scaffold_cfg_dir := homeDir + sep + cfg_dir
+	scaffold_cfg_dir := user_cfg_dir + sep + cfg_dir
 	cfg_file := scaffold_cfg_dir + sep + cfg_filename
 
 	if _, err := os.Stat(scaffold_cfg_dir); err != nil {
@@ -84,6 +99,7 @@ func main() {
 		_, err = cfgfd.WriteString(cfg_content)
 		ifFerr("Unable to write scaffold configuration file content", err)
 		fmt.Println("Wrote new scaffold configuration file")
+
 		_, err = toml.Decode(cfg_content, &setup)
 		ifFerr("[Failed] to parse config file", err)
 	} else {
@@ -292,6 +308,9 @@ func availableProjectTypes(adir string) ([]string, error) {
 
 	for _, e := range entries {
 		if e.IsDir() {
+			if e.Name() == ".git" {
+				continue
+			}
 			res = append(res, e.Name())
 		}
 	}